RUNXIN F56A1 Manual Filter
- Estimated Delivery : Up to 4 business days
RUNXIN F56A1 Manual Filter Valve
The RUNXIN F56A1 Manual Filter Valve is designed for filtration systems where user‐control of backwash and rinse cycles is preferred. With a flow capacity up to 4 m³ per hour (≈4000 L/h), it suits filter vessels of 6″–12″ diameter. It features manual operation through a handwheel, enabling you to switch between Service → Backwash → Fast Rinse → Service without electrical controls. This makes the valve sturdy and easy to maintain.
Key Features
- High Flow Capacity: Supports up to 4 m³/h flow rate, ideal for moderate commercial filters.
- Manual Control: The handwheel lets you choose the filter mode manually—no automatic electronics required.
- Durable Design: Built with hermetic head faces and corrosion‑resistant materials for reliable service.
- Versatile Application: Works with sand, activated carbon, iron‑removal resin, and other media.
- Simple Installation: Suitable for 1″F inlet/outlet, 2.5″‐8NPSM base, and offers flow rates for 6″‑12″ tanks.
Technical Specifications
| Parameter | Value |
|---|---|
| Inlet/Outlet | 1″ Female threads |
| Max Flow Rate | ~4 m³/h (≈4000 L/h) |
| Tank Size | 6″-12″ diameter (for typical use) |
| Operating Pressure | 0.15-0.6 MPa (≈1.5-6 bar) |
| Operating Temp | 5 °C – 50 °C |
| Media Compatibility | Sand, activated carbon |
Why Choose the RUNXIN F56A1 Manual Filter Valve?
If you run a mid‐sized water filtration system and prefer full control, this valve offers a cost‐effective solution. Because it uses manual control, you avoid electronic complexity. Moreover, its high flow capability ensures your system won’t become a bottleneck. Also, the durable build gives you peace of mind with fewer service calls and less downtime.
Installation & Maintenance Tips
- Mount the valve on a suitable vessel (6″–12″ diameter) with a level base and proper plumbing.
- Connect inlet, outlet and drain lines according to the manufacturer’s guidelines—ensure the drain pipe is lower than the valve outlet.
- Use the handwheel to switch between modes: Service → Backwash → Fast Rinse → Service. Follow the cycle timing from the spec sheet.
- Regularly check for wear on O‑rings, handle mechanism and ensure the flow rate stays within specification.
- Monitor media condition: If you notice increased pressure drop or poor water output, perform backwash or replace filter media as required.












10" BB PP Sediment Filters
RUNXIN N75A Automatic Filter
10" Standard GAC Filter
RUNXIN F56D Manual Filter
